The Development of Teleoperated Driving to Cooperate with the Autonomous Driving Experience

Autonomous vehicles are increasingly being adopted, with manufacturers competing to enhance automation capabilities. While full automation eliminates human input, lower levels still require driver intervention under specific conditions. This study presents the design and development of a prototype vehicle featuring both low- and high-level control systems, integrated with a 5G-based teleoperation interface that enables seamless switching between autonomous and remote-control modes. The system includes a malfunction surveillance unit that monitors communication latency and obstacle conditions, triggering a hardware-based emergency braking mechanism when safety thresholds are exceeded. Field experiments conducted over four test phases around Chulalongkorn University demonstrated stable performance under both driving modes. Mean lateral deviations ranged from 0.19 m to 0.33 m, with maximum deviations up to 0.88 m. Average end-to-end latency was 109.7 ms, with worst-case spikes of 316.6 ms. The emergency fallback system successfully identified all predefined fault conditions and responded with timely braking. Latency-aware stopping analysis showed an increase in braking distance from 1.42 m to 2.37 m at 3 m/s. In scenarios with extreme latency (>500 ms), the system required operator steering input or fallback to autonomous mode to avoid obstacles. These results confirm the platform’s effectiveness in real-world teleoperation over public 5G networks and its potential scalability for broader deployment.