Design of CMOS low-dropout voltage regulator for power management integrated circuit in 0.18-µm technology
Design of CMOS low-dropout voltage regulator for power management integrated circuit in 0.18-µm technology
S. Murad,A. Harun,3 Authors,J. Karim
TLDR
A low-dropout (LDO) voltage regulator for the power management integrated circuit in 0.18-µm CMOS technology using Cadence software is presented and the simulation results show that the proposed design provides a 2.41”V constant output voltage for the supply voltage ranges of 2.55 V to 3.55V.
Abstract
A low-dropout (LDO) voltage regulator is the main component used in the majority of portable electronic application since it is used as power management unit in those applications. In this paper, a LDO regulator for the power management integrated circuit in 0.18-µm CMOS technology using Cadence software is presented. The error amplifier of the proposed LDO employed seven transistors for current mirror. Meanwhile, the PMOS transistor is used as a pass element transistor to control the voltage variation. The resistors are used as a feedback network circuit while the capacitor is used to minimise the variation of output voltage. The simulation results show that the proposed design provides a 2.41 V constant output voltage for the supply voltage ranges of 2.55 V to 3.55 V. The dropout voltage of 140 mV is achieved with 1.48 mW power consumption. The line regulation is 1.0 mV/V and the load regulation is 0.41 mV/A, while the layout of the proposed regulator is 27 µm x 34 µm.A low-dropout (LDO) voltage regulator is the main component used in the majority of portable electronic application since it is used as power management unit in those applications. In this paper, a LDO regulator for the power management integrated circuit in 0.18-µm CMOS technology using Cadence software is presented. The error amplifier of the proposed LDO employed seven transistors for current mirror. Meanwhile, the PMOS transistor is used as a pass element transistor to control the voltage variation. The resistors are used as a feedback network circuit while the capacitor is used to minimise the variation of output voltage. The simulation results show that the proposed design provides a 2.41 V constant output voltage for the supply voltage ranges of 2.55 V to 3.55 V. The dropout voltage of 140 mV is achieved with 1.48 mW power consumption. The line regulation is 1.0 mV/V and the load regulation is 0.41 mV/A, while the layout of the proposed regulator is 27 µm x 34 µm.